95% of the whole machine electric elements use international famous brands. The control centre uses German Simons PLC and colorful touching screen, higher reliability, low failure and higher efficiency, and is easy to learn an operate; the main machine and fan motor applies transducer speed regulation, stable and energy saving; touch screen is fitted for each section, making operation easier; PC carries out all parameter setting, simple and visible, each phase and slot height are controlled and defined using transducer, being accurate; interval feeding is available, easy for large sized cardboard printing. 0-position return, printing position memory during wiping and auto restoration are available, reducing the time of the adjustment; auto ink roller drop and rise reduces paper waste; each section is pneumatically locked and electricity separable, has several orders input function, which will store mote orders when connected to PC and implement ordering, clients management, report forms printing etc; distance maintenance and parameter repair may be carried out.

Paper feeding unit

Applies vacuum absorption auxiliary back-kick paper feeding system; the absorption force is adjustable to different cardboard thickness and absorbs the cardboard onto the feeding table., then enters into the printing section smoothly.
With computerized adjustment on the side wall, quick adjustment and accurate position.
The upper paper-feeding roller is wrapped with wearable rubber and subject to balance alignment; the lower paper-feeding roller is patterned and chrome plated.
Production number setting device is fitted, needs no manual accounting.
Has interval paper feeding device (continuous or interval manner is optional). Convenient for large-sized cardboard printing.
When auto 0 position return device is used for ordinary cartons, the position can be correctly adjusted by mean of trial printing two pieces of cartons, thus reduces the waste of the cartons.
Has brush, can remove the impurities on the cardboard to improve printing quality.
The functions on the control panel are clear and centralized. Easy to operation.
Has several orders input function.

Printing unit

Applies hanging plate printing system, easy for plate changing; and has pedal switch, easy for plate hanging.
Has anilox roller plus paper feeding system, auto lifting device ( in feeding anilox roller drops and contacts with printing plate, whereas in stop, it rises to separate from the printing plate)
The circumferential adjustment of the printing platen applies planetary gear structure.
The printing phase can besubjected to a 360 degree adjustment by means of a transducer, a touch screen control or in an electric numeral way (in both running and stop status)
The inking roller uses wearable high-precision rigid chrome anilox roller.
The rubber roller is formed by means of wrapping a steel pipe with wearable rubber, and has good ink transfer effect.
The transverse position can be adjusted, with total distance adjustable from right to left being 10mm.

Slotting unit

Computer adjusting the height of the box is adopted in slotting unit. The length and the width can be adjusted. It has upper and lower knives, upper and lower rolling lines, cutting paper knife, pressing paper stick, and position adjusting device with standard rulers by hand, which can save unit-changing time.
The scoring roller, the feeding roller and the slotter seat move axially, guided by a rolling straight guiding track so that movement is stable and positioning is accurate.
The slot phase applies transducer and touching screen control, can be electrically regulated within 360 degree in numeral (both in running and stop), has restoration function; and can store orders.
A touch screen is set on the control panel that can control the feeding section, printing section, slotting section, easy to operate.
Has central knife moving, being able to produce large-sized 2-pieces cartons.
The slotter shaft and the feeding roller shaft are hard-chrome plated and finely polished, enjoying long lifespan and no vibration during moving.
Punching device is optional according to users’ necessity.

Die cutting unit

The rubber roller is designed as folded rubber cushion, providing convenience and ease for removal , installation and replacement.
The rubber roller can move axially 50mm leftward and rightward, controlled by an automatic control system to ensure a steady and reliable movement.
A frequency converter is adopted at the phase position of the die cutter unit. The touching screen adjustment. Order forms can be stored in the system.
A pneumatical system is used to control the spacing between the die roller and the rubber roller
A speed difference offsetting device is adopted that can automatically adjust the rotation speed of the rubber roller so that the die-cutting carton has exactly the same shape as the die shape.
The cores of the rubber roller and the die roller are made from quality steel and are hard-chrome plated and finely polished, The track path is balanced and calibrated to enhance the stability of movement.